Quantcast

Modern life and design in our historical American Foursquare home

Subscribe to get new posts instantly by email:


Posts Tagged “budget”

How to build a (covered) raised garden bed

By on March 31, 2016


We’re finally finished building our custom raised garden bed, and today we’re sharing our design and construction process.

How to Build a Covered Raised Garden Bed

Let’s get right to the specifics! We built the base of the raised bed from 2 x 10 untreated cedar boards. Cedar is a great choice for raised garden bed construction. It’s both food-safe (since we’ll be eating things from this garden) and very weather/rot-resistant.

Our local Menards had a great selection of cedar lumber, and we were able to get a lot of the boards cut down to the lengths we needed (and to fit in our car for the ride home).

Using Cedar for a Raised Garden Bed

Using Cedar to Build Raised Garden Bed

We designed the box base to be 4 feet wide by 6 feet long by 10 inches deep. It’s just wide enough to let us reach the plants in the center from the long sides, and the 10-inch depth will allow us to grow root crops like carrots, radishes and turnips.

John built the box outside on the site we’d chosen, and made sure it was level before attaching the sides together.

How to Build a Raised Garden Bed

How to Build a Raised Garden Bed

We also attached a layer of galvanized wire mesh and landscape fabric to the underside of the box. This will help keep out weeds, any existing plants or bulbs we might have missed, and even potential tunneling rodents. We poked small holes in the fabric for drainage, and John drove stakes into the ground at the corners and screwed them into the base once it was in place for stability.

How to Build a Raised Garden Bed

How to Build a Raised Garden Bed

How to Build a Raised Garden Bed

How to Build a Raised Garden Bed

So far, so good! But ultimately we needed our raised bed to be more protected from the neighborhood wildlife (which includes squirrels, rabbits, birds, and even the occasional raccoon). We love having visitors in our backyard, but not when they eat our homegrown produce.

So we designed a custom “roof” to sit permanently on top of the box base to keep out critters. The roof is basically a frame of thin cedar boards, with galvanized wire mesh covering the open spaces.

How to Build a Raised Garden Bed

The idea is to maximize sunlight, rainfall, air circulation, and beneficial insect access (like pollinating bees), while minimizing intrusion from anything larger (like pesky rabbits). John built the roof to be 3 feet high at the “peak” to accommodate plants that can grow that tall, like bush peas, beans and broccoli.

How to Build a Raised Garden Bed

To give us easy access to the inside of the garden bed for planting, watering and harvesting, John created doors for the long sides of the roof that hinge open from the top. These are also made from thin cedar boards, to minimize shadows from incoming sunlight.

How to Build a Raised Garden Bed

Once the raised bed and roof were constructed (and before we permanently attached the doors), I created a custom soil mixture to fill the box base, following the formula for Mel’s Mix. As outlined in Square Foot Gardening, Mel’s Mix is a combination of equal parts blended compost, perlite or vermiculite, and peat moss.

First, I got several bags of compost from different sources (such as mushroom compost, humus, manure, leaf, etc.) and mixed those together. Then I raked together equal amounts of the compost, perlite, and peat moss on a large tarp in our backyard until it was well combined.

How to Build a Raised Garden Bed

How to Build a Raised Garden Bed

How to Build a Raised Garden Bed

How to Build a Raised Garden Bed

As I mixed the soil and added it in batches to the raised bed, John stapled the wire mesh to the frame and doors.

To minimize the metallic glare of the wire mesh, we spray-painted it matte black (except for the north side against the fence, which we left as bare metal to function as a trellis for pea vines). The black color helps the mesh visually disappear and absorb sunlight. After attaching the mesh, John attached the doors to the frame with galvanized hinges.

How to Build a Raised Garden Bed

How to Build a Raised Garden Bed

build-raised-bed-20b

I also picked up a couple of basic 5-gallon buckets from the home improvement store to use as deep planting containers, for growing additional edibles that are too tall for the raised bed (like tomatoes). I painted them deep green to cover up their utilitarian appearance and help them blend into the garden, put some styrofoam pieces in the bottoms for drainage, and filled them with my soil mix.

I also refreshed some old metal tomato cages from our garage with a quick coat of spray paint. Since we’re trying to keep costs low with this project, this was an easy (and inexpensive) way to give a new look to existing containers and materials.

How to Build a Raised Garden Bed

How to Build a Raised Garden Bed

How to Build a Raised Garden Bed

To get the most from our available space in the raised garden bed, I marked out specific planting areas with jute twine and garden staples. Since I’m not following a strict square-foot gardening layout, these are mostly temporary guidelines just to help me organize and plant seeds and starts.

How to Build a Raised Garden Bed

And with that, our custom covered raised garden bed is finished!

How to Build a Raised Garden Bed

Now that spring is officially upon us, it’s time to actually start planting. In our next post, we’ll share what we’re doing with our indoor seedlings and how we’re direct-sowing outside as well.

build-raised-bed-26

(linked on Thrifty Decor Chick and Remodelaholic)

March 31, 2016

A DIY Ikea Tarva dresser for our modern kid

By on April 23, 2015


Last week, we talked about moving our treasured family nursery dresser into Baby T’s room, and shared our DIY plans to design a modern furniture look with the Ikea Tarva three-drawer dresser in Toddler E’s big-girl bedroom. Using dark wood stain and white paint, we wanted to create a sophisticated but classic design that would be timeless, and work with E’s evolving style and functionality needs over the next several years. (You can see some of our inspiration images for this project on our Pinterest board!)

A DIY Ikea Tarva Dresser for our Modern Kid | RatherSquare.com

So after buying the Tarva and bringing it home, we unpacked the individual dresser parts and set them up in our garage. John took on most of the work for this particular DIY furniture project (while I was busy painting the fabric drawers for the nursery), and he wanted to stain and paint the dresser parts in their unassembled state before putting the final piece together.

A DIY Ikea Tarva Dresser for our Modern Kid | RatherSquare.com

For the stain, we decided to try Minwax Polyshades. It’s got a built-in polyurethane coat to protect and make the surface more durable, which eliminates the need for a separate topcoat. Traditionally, wood staining involves rubbing the stain onto the surface with a soft cloth, wiping off any excess, and ending with a protective finish. But with a combination stain-polyurethane formula like Polyshades, you apply thin coats with a brush and let them dry without wiping off. We’d never used this one-step product before, but it sounded convenient and potentially time-saving. So we went ahead and bought a quart of the Espresso Satin finish, a nice dark color that looked like it would match the toddler’s bed frame. (According to the label, one quart covers 120-150 square feet – plenty for our little dresser project.)

A DIY Ikea Tarva Dresser for our Modern Kid | RatherSquare.com

To paint the drawer fronts, we wanted a soft paint color that would work well with the warm tones in the toddler’s bedroom. In order to keep our DIY costs low and stay within our total budget of $100, we surveyed our “leftover from previous projects” paint arsenal, and chose Swiss Coffee by Behr, a nice clean shade that’s bright but not blinding white.

A DIY Ikea Tarva Dresser for our Modern Kid | RatherSquare.com

With the materials assembled and the dresser pieces spread out and ready, John got to work. First, he focused on the parts to be stained: the dresser’s top, sides, legs and knobs. In order to get complete stain coverage on the small legs and knobs without touching them and making fingerprints during the staining process, he attached them to larger pieces of scrap wood. Then he sanded all the wood surfaces lightly and wiped them clean.

A DIY Ikea Tarva Dresser for our Modern Kid | RatherSquare.com

Next, he used a foam brush to apply wood conditioner to the unfinished pieces – an important pre-staining step that properly prepares the wood surface and helps the grain open up to absorb stain more evenly.

A DIY Ikea Tarva Dresser for our Modern Kid | RatherSquare.com

As you can see below, this really makes a difference when working with a soft wood variety like the Tarva’s white pine.

A DIY Ikea Tarva Dresser for our Modern Kid | RatherSquare.com

Once the wood conditioner was dry, John used a natural bristle brush to “paint” the Polyshades stain onto the conditioned wood in the direction of the grain.

A DIY Ikea Tarva Dresser for our Modern Kid | RatherSquare.com

A DIY Ikea Tarva Dresser for our Modern Kid | RatherSquare.com

Knowing he wouldn’t be able to wipe off any excess stain, John was careful to use long even brushstrokes. But he still found it difficult to cover the surfaces with a uniform layer of stain. Applying too much pressure on the brush created a thin streaky coat that let the bare wood show through more than we wanted. On the other hand, brushing with a lighter touch tended to deposit uneven patches of stain across the wood. It was a lot of trial and error to find a technique that worked – and even then, we weren’t able to eliminate every single brush mark.

A DIY Ikea Tarva Dresser for our Modern Kid | RatherSquare.com

The Espresso color was also not quite as dark as we wanted yet, which meant we’d need another coat of stain. So John left the first coat to dry for several hours, and in the meantime he moved on to painting the drawer fronts. For these, we wanted solid paint coverage that would still allow the texture of the wood grain to show through, something we knew we could achieve by doing multiple thinner layers of paint instead of one thick coat.

John brushed the first coat of Swiss Coffee on the three drawer fronts, thin enough that the knots in the pine were still visible.

A DIY Ikea Tarva Dresser for our Modern Kid | RatherSquare.com

With the first paint coat on the drawer fronts, John jumped back to the stained pieces (now dry), sanded them lightly, and wiped off the residue to prepare for another coat of Polyshades. The first coat still looked a little streaky, and we hoped that the second coat would be dark enough to camouflage the imperfections. But even though John had sanded between coats to give the surface better adhesion, the glossy polyurethane in the first coat still made it difficult to get a continuous finish with the second coat. He had to brush the stain on lightly to keep it from pooling, and it turned out to be even more tricky to apply than the first coat.

A DIY Ikea Tarva Dresser for our Modern Kid | RatherSquare.com

After finishing the second stain coat, John switched back again to the painted drawer fronts (also now dry), sanded them lightly, and painted on a second thin coat of Swiss Coffee. When that dried, he painted a third and final coat. Then he left both the stained and painted dresser pieces to dry overnight.

The next day, we brought everything up to E’s bedroom, and she and John went to work assembling the dresser.

A DIY Ikea Tarva Dresser for our Modern Kid | RatherSquare.com

A DIY Ikea Tarva Dresser for our Modern Kid | RatherSquare.com

And here’s the finished piece!

A DIY Ikea Tarva Dresser for our Modern Kid | RatherSquare.com

A DIY Ikea Tarva Dresser for our Modern Kid | RatherSquare.com

A DIY Ikea Tarva Dresser for our Modern Kid | RatherSquare.com

The dark stain with white drawers is a classic look with a modern twist – and just as we hoped, it fits perfectly with her decor without looking babyish or cutesy.

A DIY Ikea Tarva Dresser for our Modern Kid | RatherSquare.com

A DIY Ikea Tarva Dresser for our Modern Kid | RatherSquare.com

A DIY Ikea Tarva Dresser for our Modern Kid | RatherSquare.com

A DIY Ikea Tarva Dresser for our Modern Kid | RatherSquare.com

We love how this custom-finished dresser came out, and so does Toddler E. It’s the perfect size for her – she can reach all the drawers and pick out her own clothes each morning.

A DIY Ikea Tarva Dresser for our Modern Kid | RatherSquare.com

But would we use the Polyshades stain again? The pros: its Espresso color does look deep and rich, the streaks from the brushstrokes aren’t too noticeable, and the surface is well sealed and protected. The cons: it was a LOT trickier to apply than we thought it would be, and while it did save John the extra step of adding a separate protective topcoat, there was definitely a trade-off of extra effort and time as he attempted to create a smooth finish. So… we’re not sure if we’ll use this stain-plus-polyurethane product again, and we may go back to the traditional stain method for our next wood staining project.

But in the end, we’re very happy with our DIY kid-friendly Tarva project! And hopefully Toddler E will be using this dresser for many years to come.

We’re curious – have you ever used Polyshades before? What was your experience with it? Do you have any helpful tips or stories?

(linked on Miss Mustard Seed and Thrifty Decor Chick and Remodelaholic)

April 23, 2015

Our vintage nursery dresser + modern DIY inspiration

By on April 15, 2015


Today we’re sharing our inspiration and ideas for a classic modern Ikea dresser hack, plus the history behind our vintage DIY nursery dresser!

Our Vintage Nursery Dresser and Modern DIY Inspiration | RatherSquare.com

As you know, we’ve been transforming Toddler E’s former nursery into a big-girl bedroom (see the moodboard and plans here). We’re slowly but surely updating things like furniture, artwork, window treatments and lighting, and even the closet. Last summer, before Baby T arrived, we tackled one of the big projects on our to-do list: replacing E’s vintage oversized dresser.

Our Vintage Nursery Dresser and Modern DIY Inspiration | RatherSquare.com

This multi-functional piece had been perfect for her infant needs – we stored everything from clothes and baby gear to diapers and wipes inside, and also used it as a changing table. But by last summer, E was potty trained and her bedroom no longer required diaper-related storage or functionality. And we wanted to move this perfect-for-a-nursery dresser into the new baby‘s room, so it was time to find something different to fit E’s big-girl lifestyle. But before we talk about our search for her new dresser, let’s share a little backstory on the old one.

The perfect nursery dresser

There’s history behind this piece of furniture. It was actually John’s childhood dresser nearly 40 years ago, and his parents gave it to us when we were getting ready for E’s arrival. We were excited to keep it in the family and re-use it for a new generation – the dresser’s solid wood construction just needed a little DIY refresh for its next phase of life.

Here’s what we started with:

Our Vintage Nursery Dresser and Modern DIY Inspiration | RatherSquare.com

John removed all the drawers, took off the dated brass hardware, and lightly sanded the dresser’s case and drawer fronts. Then he primed the bare wood and painted it black, to match the crib we had bought for the nursery.

Our Vintage Nursery Dresser and Modern DIY Inspiration | RatherSquare.com

Our Vintage Nursery Dresser and Modern DIY Inspiration | RatherSquare.com

After the paint dried, John finished the surfaces with a protective coat of Poly Whey in Clear Satin. It’s a non-toxic and eco-friendly furniture finish that we also used on our pantry cabinets.

Our Vintage Nursery Dresser and Modern DIY Inspiration | RatherSquare.com

Finally, we added new hardware (classic nickel pulls and some fun blue and green knobs), filled the dresser with little onesies and lots of diapers, and put a changing pad on top.

Our Vintage Nursery Dresser and Modern DIY Inspiration | RatherSquare.com

We used this DIY nursery dresser in E’s bedroom until last summer, when it was time to move it into Baby T’s room. We kept the black color and just changed out the top knobs to coordinate with his nursery decor.

Our Vintage Nursery Dresser and Modern DIY Inspiration | RatherSquare.com

Which brings us back to our search for a new dresser for E and her big-girl clothes. We planned to put a toddler bed in her bedroom where the old dresser used to be, so the new dresser would have to go against the opposite wall and be small enough to fit in a narrow space between the closet door and a heating vent.

New dresser and inspiration

We looked around at retail stores, thrift shops, and on local online resale boards for dressers that might fit the bill. Our requirements were:

After considering many different options, we decided on the Tarva 3-drawer chest from Ikea:

Our Vintage Nursery Dresser and Modern DIY Inspiration | RatherSquare.com

The Tarva is a nice size that’s very user-friendly for Toddler E – she’s able to reach all the drawers to access her clothes, which is important as we encourage her to be more independent. It’s narrow enough to fit in the 32-inch wide space we have available between her closet door and heating vent. We also liked its strong and solid wood frame and its smooth-rolling drawer mechanism, making it sturdy but easy for little arms to open and close.

And of course, I immediately started thinking about how we could customize it for her new room design.

Moodboard for Toddler's Bedroom | Rather Square

There are tons of Tarva design hacks out there – it’s the perfect base for DIY customization with its simple shape and clean lines – but I didn’t want to go too crazy with this piece. I really liked the idea of a stain/paint combination – dark wood around the case to match the dark wood bed frame, and white drawer fronts for a fresh contrast to keep it from feeling dark and heavy. I found some inspiration photos, showed John, and we both thought this look would fit really well with the toddler’s other room elements.

Ikea Tarva Dresser Hack from Homepolish | RatherSquare.com
from Homepolish via Refinery29

Ikea Tarva Dresser Hack from stephandben | RatherSquare.com
from Steph and Ben’s Travels

Ikea Dresser Hack from Apartment Therapy | RatherSquare.com
from Kate Miss via Apartment Therapy

It’s a sophisticated but classic style that looks timeless. We didn’t want anything too trendy or cute or age-specific that might be dated in a few years (like a pink princess theme – yikes!), but this dark-stain-white-paint design is so fresh and simple that it should easily coordinate with any future room decor changes.

In our next post, we’ll share a little DIY tutorial on how we stained and painted the Tarva dresser. (Update: check out the tutorial here!) In the meantime, here’s a sneak peek of the finished piece…

Our Vintage Nursery Dresser and Modern DIY Inspiration | RatherSquare.com

Many more details to come, including our process, our experience with staining wood furniture, and how Toddler E likes her new dresser!

(linked on Remodelaholic and Miss Mustard Seed)

Links may contain affiliates.

April 15, 2015

Flea market adventures (and a little advice)

By on March 4, 2015


This past weekend, John and I had a rare kid-free afternoon and we decided to hit up the Kane County Flea Market, about an hour west of Chicago. We both love flea markets but realized we hadn’t ever been to one together (crazy!). So we drove out in the cold and snow for the flea market’s opening weekend of the year, not quite sure what to expect but looking forward to a few hours of browsing around. We mainly wanted to see what this flea market had to offer and hopefully find a little inspiration along the way.

Flea Market Fun | Rather Square

Flea markets are fun, but can be overwhelming if you don’t have some kind of plan ahead of time. Keeping our 2015 goals in mind, we agreed to purchase something only if A) it fit our specific home renovation needs, and B) it was a good value for the cost. John wanted to look for benches for our front and back entry areas, and I planned to keep my eyes open for cheap picture frames (for a wall art project I want to do in the nursery) and interesting drawer knobs (for the toddler’s new dresser). We also brought some essential flea market tools with us: a tape measure, our list of things to look for, measurements and diagrams of the rooms in our house, and low expectations.

Flea Market Fun | Rather Square

Once we got to the flea market, we kept our eyes peeled for items that were solid and affordable, and avoided the booths selling mass-market junk and cutesy-crafty stuff. We noticed that a lot of the furniture for sale was of the “vintage-repurposed” variety, like these pieces we saw when we first walked in.

Flea Market Fun | Rather Square

It reminded us a little of “Flea Market Flip,” the TV show where people buy raw-state items at flea markets, create something new with them, then turn around and resell them at the flea market as custom design pieces. The “flip” furniture we saw at the Kane County Flea Market was pretty cool, but not really something we’d consider buying – both because we want to refurbish pieces ourselves, and because the “flip” prices were way above our budget. Still, we enjoyed checking them out for inspiration and ideas.

Flea Market Fun | Rather Square

In terms of potential benches for our entryways, nothing we saw was quite right for our needs (or wallets). But because our expectations were low to begin with, it was fun to just browse around and see what else people were selling. We noticed a lot of vintage woodworking tools, like these old planers that John found.

Flea Market Fun | Rather Square

I spent some time looking through this table full of old drawer pulls, handles and other hardware. Nothing that was perfect for my dresser project, but I got some good ideas.

Flea Market Fun | Rather Square

We discovered a lot of random odds and ends, like a doll-sized metal play kitchen (so cute), an old rotary telephone (for when the toddler starts asking for her own phone), and a box of red 45s.

Flea Market Fun | Rather Square

Flea Market Fun | Rather Square

Flea Market Fun | Rather Square

And a plethora of pop culture memorabilia, like this Star Trek game (a nice collectible for Spock fans – RIP, Leonard Nimoy).

Flea Market Fun | Rather Square

I browsed around booths full of old books, and found gems like these useful handbooks for judo and revenge (hey, you never know when knowledge like that might come in handy).

Flea Market Fun | Rather Square

Ultimately, we didn’t have much luck in our hunt for benches, knobs and frames. Since we were only able to get out to this flea market during the afternoon of the last day, not a lot of good finds were left, and in fact some dealers were already calling it a day and packing up their booths. So we ended up going home empty-handed this time.

But despite the less-than-ideal conditions, we had a fun afternoon! Cheaper than a movie date (it’s $5 admission for adults, and children under 12 are free), especially if you don’t end up making any big purchases. I definitely want to go to this flea market again, but maybe when the weather warms up a bit (so there’ll be more dealers outside) and next time we’ll come earlier in the weekend when things aren’t so picked-over. And we can even bring the kids along for a fun family outing. This Conde Nast Traveler article has some great tips and advice for visiting the Kane County Flea Market, if you’d like more information.

The best advice we have for flea market goers: Have a list of ideas ahead of time, but keep your expectations low and your budget firm. Consider your visit as an adventure with a mystery ending. Expect to see fun, interesting and just plain weird things (and people!). Be flexible, and you won’t be disappointed. And if after all of that, you score an amazing find for your home too… bonus!

(linked on Remodelaholic and Miss Mustard Seed)

March 4, 2015

Balance, value, and our goals for 2015

By on February 16, 2015


John and I have finally nailed down (pun intended!) our house project plans for 2015, and we’re excited to share them! Our challenge this year: How to get the most value from our small budget and limited free time.

How to get the most value from a small budget and limited free time | Rather Square

We’re starting out the year with a very limited house project budget, mainly for two reasons. First of all, we need to continue funneling cash into our emergency fund (since it was nearly drained to pay for the new furnace last year), and build it back up to a comfortable level so that we’re again prepared for unexpected disasters. Secondly, we’re still catching up financially after the unpaid maternity leave I took last year from my day job after Baby T was born. Since we’re committed to staying as debt-free as possible, this means that we need to be smart about how we spend on home improvement and DIY projects.

So we did a bit of informal cost-benefit analysis, and our first priority will be projects that improve our home’s functionality and safety. But we’re also adding some fun design projects to our list, things we can DIY at a minimal cost but that will have a big impact. Finally, we’ll need to fit these projects into our already-busy daily life and family responsibilities, so we’re trying to be as flexible as possible with our expectations and timeframes. It’s all about balance and keeping an eye on the big picture.

Without further ado, here are our goals and plans for 2015!


GOAL: Get an energy audit
WHEN: Before spring

Choosing a New Furnace for an Old House | Rather Square

Attic Insulation | Rather Square

We talked about scheduling an energy audit last year, but then didn’t follow through in favor of other projects. Now we’re finally planning to set up an audit next month so that we can get a clear overall picture of our home’s energy efficiency. Our new furnace was a big step in the right direction, and hopefully the results of the audit will help us make smart decisions going forward.

Our energy audit will cost about $100, but it’s a good investment and a valuable resource. Knowledge is power.


GOAL: Finish Toddler E’s bedroom
WHEN: Late winter/early spring

Toddler Girl Bedroom | Rather Square

Toddler Bedroom Owl Art | Rather Square

We’re so close to finishing the toddler’s big-girl room! The big remaining task is to hang some art on her walls. She’s already got these fun owl prints, and we’ll be looking for a few more affordable pieces to fill out the room (and then figure out how to hang them on the plaster walls – a question that applies to our whole house). Finally, we’re going to add shelving and a light to her closet.

The cost of completing this room will be pretty minimal, and Toddler E is excited to have her very own special space (which makes us all happy).


GOAL: Finish Baby T’s nursery
WHEN: Spring/early summer

How to Paint Fabric Drawers | Rather Square

Updating Curtains in a Nursery | Rather Square

The nursery too is nearly done, but there are a few important changes and additions we need to make. When we first bought the house, this room was used for storage and we painted the walls a blue-gray color. But now that we’ve re-designed this room as Baby T’s nursery, I’m realizing that a warmer paint tone would better tie the other design elements (like the rug, furniture and accessories) together. Also, the curtains we originally chose are too flimsy and short, and we need to find some more substantial panels to block light while Baby T sleeps. And then once the walls are repainted, we want to get (or make) some unique artwork to hang in here. Finally, we’ll add a shelf and lighting to the closet.

Finishing the nursery will cost a little more than the toddler’s room (we’ll need to purchase paint, curtain material and artwork), but I think we can be really creative here to get the most value for our budget.


GOAL: Clean up the front yard landscaping
WHEN: Summer

Front Yard Landscaping | Rather Square

Late Summer Landscaping | Rather Square

We’re not planning to take on any big landscaping projects this year, but there are a few smaller things we can do to tidy up the front of the house that will hopefully improve its curb appeal. First, we’d like to have the stumps of the yew shrubs removed. When John cut the yews down last summer, he left these in place since they weren’t something we wanted to try removing on our own. So this summer, we’ll hire someone to dig out the roots properly (to us, it’s a good value for the cost). We also want to add some more grass seed, take out our half-dead rosebushes, and transplant some of our backyard garden to the front. Our thumbs aren’t always green, but at least moving around the plants we already have is free!

This project will probably run us anywhere from $100 to $300 (root removal, grass seed, mulch and other basic landscaping upkeep materials), but aside from the root removal, we’ll be keeping costs down by doing this work ourselves.


GOAL: Refresh the front porch
WHEN: Summer

Front Porch | Rather Square

Front Porch Mailbox | Rather Square

There are a few front porch DIY projects that we’ve been meaning to do since we moved in, and this summer is a great time to finally get these underway. First, we want to repaint the hunter green steps and porch floor with a new color, and also add some traction to the steps since they get really slippery in the winter. While we’re at it, we want to replace the old brassy exterior light fixture, the rusty purple mailbox, and maybe even repaint the outer screen door.

All of this would improve both the front porch’s function (making it safer during snowy and rainy weather) and its visual aesthetics (hunter green and purple are not our favorite colors!). So these improvements should be a good investment and a good value.


GOAL: Repair and paint the back deck
WHEN: Summer

Back Deck | Rather Square

Back Deck Stairs | Rather Square

We use our back deck every morning as we leave the house for school and work. The wood is mostly in good shape, but it’s weathered and there are some areas that need reinforcement and/or rebuilding (like the wood on the bottom step in the above photo that just fell off soon after we moved in). So our first task is to repair any instabilities and make sure the structure is solid. After that, John wants to clean and paint the deck with a product like Deckover to both protect the wood and give it a slightly-rough, non-slip surface so it’s safer to walk on in the winter.

We’d love to build a bigger, better deck sometime in the future, but for now our goal is to make the existing deck stronger and safer. These fixes are relatively inexpensive and will go a long way toward extending its life and usefulness.


That takes us through the next six months or so, but as we found out last year, a lot can change in that time. So right now we don’t want to make any concrete plans beyond the end of this summer – instead, we’d like to see how things go with these initial projects, and then go from there. Since our lives and needs are always evolving, it’s better to keep our plans flexible. (And who knows – maybe we’ll win the lottery next month, and this carefully-budget-conscious list will suddenly get a lot bigger and shinier…!)

What are your goals for 2015 (home improvement and otherwise)?

Related Posts Plugin for WordPress, Blogger...

February 16, 2015